Dealing room video solutionEND DESIGN AV
End Design Limited
Unit 37
Bookham Industrial Park
Church Road Bookham
KT23 3EU UK

 

t.01372 458080
f.01372 450592
VIDEO DISTRIBUTION SPECIALISTS SINCE 1984
 
 
Home   | Up  |   Info   | Search  | Shopping Cart  |  Checkout   | Contact Us  | Login   

Left tabVGA DistributionRight tab

For impartial help and advice backed by 20 years experience call 01372 458080

End Design AV > VGA Solutions > VGA Distribution

Ref: 101-312 way Rextron SVGA Monitor Splitter (VSA12)
2 way Rextron SVGA Monitor Splitter (VSA12)
  • 1 Video input to 2 Video Outputs
  • Transmission Distance of 65m /210 ft.
  • Suitable for SVGA, VGA and Multisync Monitiors
  • Cascaded operation for increased outputs.
  • Automatic power-save when input is lost
  • 350 Mhz bandwidth

Requires 1 x HD15 M-F Cable for input

 
More Information




Ref: 101-344 way Rextron SVGA Monitor Splitter (VSA14)
4 way Rextron SVGA Monitor Splitter (VSA14)
  • 1 Video input to 4 Video Outputs
  • Transmission Distance of 65m /210 ft.
  • Suitable for SVGA, VGA and Multisync Monitiors
  • Cascaded operation for increased outputs.
  • Automatic power-save when input is lost
  • 350 Mhz bandwidth

Requires 1 x HD15 M-F Cable for input

 
More Information




Ref: 101-388 way Rextron SVGA Monitor Splitter (VSA18)
8 way Rextron SVGA Monitor Splitter (VSA18)
  • 1 Video input to 8 Video Outputs
  • Transmission Distance of 65m /210 ft.
  • Suitable for SVGA, VGA and Multisync Monitiors
  • Cascaded operation for increased outputs.
  • Automatic power-save when input is lost
  • 300 Mhz bandwidth

Requires 1 x HD15 M-F Cable for input

 
More Information




Ref: VGA3XLite3 Way VGA Splitter up to 65m
3 Way VGA Splitter up to 65m Split a single SVGA signal to a maximum of three displays, using standard SVGA cables. 



Ref: VGA3X3 Way VGA Splitter up to 120m
3 Way VGA Splitter up to 120m Split a single SVGA signal to a maximum of three displays, using standard SVGA cables.

This unit comes with an adjustable control to adjust the signal quality over longer lengths. 




Ref: VGA6XLite6 Way VGA Splitter up to 65m
6 Way VGA Splitter up to 65m Split a single SVGA signal to a maximum of three displays, using standard SVGA cables. 



Ref: VGA6X6 Way VGA Splitter up to 120m
6 Way VGA Splitter up to 120m Split a single SVGA signal to a maximum of three displays, using standard SVGA cables.

This unit comes with an adjustable control to adjust the signal quality over longer lengths. 




Ref: CatXVideoTX22 Port SVGA Splitter and extender
2 Port SVGA Splitter and extender CatX Video TX2 is a 2 port VGA transmitter unit. Connected to the video output of a PC this unit may be used in conjunction with different CatX Video Rx units to a VGA display. Easy to install and no software is required.

This unit requires one of the following receiver units to operate:
  • CatX Video Rx for distances up to 120m
  • CatXQ Video Rx for distances up to 300m
  • CatX Video Rx 2 for two VGA outputs up to 120m
  • CatXQ Video Rx 2 for two VGA outputs up to 300m (includes skew correction)
 




Ref: CatXVideoTX44 Port SVGA Splitter and extender
4 Port SVGA Splitter and extender CatX Video Tx 4 transmits VGA and audio over 4 Cat5/6 outputs and may be used in conjunction with any CatX Video Rx or CatXQ Video Rx unit. Local VGA and audio output is also included. Up to 3 of these Tx(2,4 or 8 port units) can be cascaded together to create up to 24 outputs (using CatX Video Tx 8). The link is via the local VGA output.
This transmitter is compatible with both 120m and 300m receiver units.
This unit requires one of the following receiver units to operate:
  • CatX Video Rx for distances up to 120m
  • CatXQ Video Rx for distances up to 300m
  • CatX Video Rx 2 for two VGA outputs up to 120m
  • CatXQ Video Rx 2 for two VGA outputs up to 300m (includes skew correction)


 




Ref: CatXVideoTX88 Port SVGA Splitter and extender
8 Port SVGA Splitter and extender CatX Video Tx 8 transmits VGA and audio over 8 Cat5/6 outputs and may be used in conjunction with any CatX Video Rx or CatXQ Video Rx unit. Local VGA and audio output is also included. Up to 3 of these Tx(2,4 or 8 port units) can be cascaded together to create up to 24 outputs (using CatX Video Tx 8). The link is via the local VGA output.
This transmitter is compatible with both 120m and 300m receiver units.
This unit requires one of the following receiver units to operate:
  • CatX Video Rx for distances up to 120m
  • CatXQ Video Rx for distances up to 300m
  • CatX Video Rx 2 for two VGA outputs up to 120m
  • CatXQ Video Rx 2 for two VGA outputs up to 300m (includes skew correction)
 


Quantity:  


Ref: VS1204TAten 4-Port A/V Over Cat 5 Splitter (transmitter unit)
Aten 4-Port A/V Over Cat 5 Splitter (transmitter unit) The VS1204T A/V Over Cat 5 Splitter is a cost-effective and efficient solution for sending high quality audio and video content to multiple displays. Connect to an ATEN A/V Over Cat 5 Receiver* via Cat 5e cable and the displays can be located up to 300 m (1000 ft) away from the single input source.

The VS1204T A/V Over Cat 5 Splitter is ideal for any professional A/V installation that requires multimedia content to delivered to multiple destinations.

* Compatible receivers

VE170R
VE170RQ (with skew adjustment)
Van Cryst VS1204T Specification sheet 




Ref: VS1208TAten 8-Port A/V Over Cat 5 Splitter (transmitter unit)
Aten 8-Port A/V Over Cat 5 Splitter (transmitter unit) The VS1208T A/V Over Cat 5 Splitter is a cost-effective and efficient solution for sending high quality audio and video content to multiple displays. Connect to an ATEN A/V Over Cat 5 Receiver* via Cat 5e cable and the displays can be located up to 300 m (1000 ft) away from the single input source.

The VS1208T A/V Over Cat 5 Splitter is ideal for any professional A/V installation that requires multimedia content to delivered to multiple destinations.

* Compatible receivers

VE170R
VE170RQ (with skew adjustment)
Van Cryst VS1208T Specification sheet 




Ref: VE170RAten A/V Receiver unit
Aten A/V Receiver unit

The VE170R is a receiver unit compatible with the VE170T, VE1204T& VE1208T

  • 1920x1200 @ 60Hz (30m)
  • 1600x1200 @ 60Hz (150m)
  • 1024x768  @ 60 Hz (300m)

Datasheet

 




Ref: VE170RQAten A/V Receiver unit
Aten A/V Receiver unit

The VE170RQ is a receiver unit compatible with the VE170T, VE1204T& VE1208T

The VE170RQ features ATEN patented Deskew technology, which supports the manual synchronization of RGB signals and corrects colour phase and timing errors that occur over large distances.

  • 1920x1200 @ 60Hz (150m)
  • 1280x1024 @ 60 Hz (300m)

Datasheet

 




Ref: CatXVideoRX2Dual SVGA output receiver with audio (up to 120 metres)
Dual SVGA output receiver with audio (up to 120 metres) CatXVideoRx2 is a Dual video + audio receiver unit, used in conjunction with any CatX video Transmitter units. This unit provides two VGA and two Audio outputs, for two displays. Easy to install with no software required.

 




Ref: CatXQVideoRX2Dual SVGA output receiver with audio (up to 300 metres)
Dual SVGA output receiver with audio (up to 300 metres) CatXQ Video Rx 2 is compatible with all CatX Video Tx units, for distances up to 300m. This unit has two VGA outputs for two displays. High quality video is output over all distances. There is also an output for stereo audio.
This unit incorporates XSQ technology to eliminate skew, especially when using Cat6 cable over longer distances up to 300m

 




Ref: CX-OW-AVP-2X82x8 VGA and Audio Matrix over Cat5/6 ** Transmitter Unit **
2x8 VGA and Audio Matrix over Cat5/6  ** Transmitter Unit **

The CatX AVP Matrix 28 transmitter routes two VGA video sources over cat5 or cat6 cable, to a maximum of eight displays,. Designed for ease of installation, this unit will broadcast VGA video and audio over cat6 UTP cable at 720p/1080i. This product connects direct to the two VGA sources, there is no local VGA output on this device. A built-in web interface facilitates the routing of the input and output settings and aslo provides diagnostic information.The Ethernet interface only allows access from authenticed users (one administrator and many operators) and is securely protected against malicious attacks. These units use a state of the art chip set thus ensuring compatibility and reliability

  • Two VGA sources to up to eight outputs
  • Input to output routing can be in any combination
  • Web interface controls VGA routing
  • Outputs selectable for AV or VP mode
  • EDID via DDC output to VGA source
  • Web interface for full diagnotic capabilities
  • 10Base-T and 100Base-TX Ethernet connectivity
  • User authentication control and secure protection
  • Future firmware updates via Ethernet port

Note: The maximum resolution / distance values depend on the receiver used (this is a transmitter unit only the image depicts front and rear of the unit)

 




Ref: CatXMultidropRxCat 5/6 Cascadable Receiver Units
Cat 5/6 Cascadable Receiver Units CatX Multi-Drop Rx is a Cat5/6 video receiver unit, used in conjunction with any CatX video Transmitter units. This unit provides×a VGA and Audio outputs. The CatX Multi-Drop Rx is a high quality and yet cost effective Cat5/6 Cascadable receiver for up to 120m.

This unit makes it easy to add additional displays to an existing single receiver, without the cost of replacing existing receiver units

Features at a glance
  • Receives video and stereo audio over Cat5/6 cable to a distance of 120m
  • SVGA output up to 1280 x 1024 75Hz at maximum distance
  • Simple to install and easy to use
  • High quality video at all distances
  •  




    Ref: CatXMultidropRx2Cat 5/6 Cascadable Receiver Unit
    Cat 5/6 Cascadable Receiver Unit CatX Multi-Drop Rx is a Cat5/6 video receiver unit, used in conjunction with any CatX video Transmitter units. This unit provides×a VGA (up to 1600x1200) and Audio outputs. The CatX Multi-Drop Rx is a high quality and yet cost effective Cat5/6 Cascadable receiver for up to 120m.

    This unit makes it easy to add additional displays to an existing single receiver, without the cost of replacing existing receiver units

    Features at a glance
  • Receives video and stereo audio over Cat5/6 cable to a distance of 120m
  • Dual VGA/Audio output
  • SVGA output up to 1280 x 1024 75Hz at maximum distance
  • Simple to install and easy to use
  • High quality video at all distances
  •  




    Ref: CatXExpander4Cat 5/6 VGA and Audio Splitter
    Cat 5/6 VGA and Audio Splitter CatX Expander 4 has a single Cat5/6 input and four Cat5/6 outputs and may be used in any part of a CatX Cat5/6 VGA distribution network.

    This means the unit can be placed at any convenient location, making good use of existing structured cable installations.

    CatX expander 4 is compatible with any of the CatX Tx (transmitter) units and CatX Rx (receiver) units.

    Features at a glance
    • SVGA Output up to 1600 x 1200
    • Transmits VGA and Audio output to 4 Rx Units
    • Simple to install and easy to use
     




    Ref: CatXExpander8Cat 5/6 VGA and Audio Splitter
    Cat 5/6 VGA and Audio Splitter CatX Expander 8 has a single Cat5/6 input and eight Cat5/6 outputs and may be used in any part of a CatX Cat5/6 VGA distribution network.

    This means the unit can be placed at any convenient location, making good use of existing structured cable installations.

    CatX expander 4 is compatible with any of the CatX Tx (transmitter) units and CatX Rx (receiver) units

    Features at a glance
    • SVGA Output up to 1600 x 1200
    • Transmits VGA and Audio output to 8 Rx Units
    • Simple to install and easy to use
     




    Ref: ALAV204TAdderLink 200 Series 4 Way Transmitter Audio, Video & RS232
    AdderLink 200 Series 4 Way Transmitter Audio, Video & RS232

    Transmitter unit only - requires receiver units

    The AdderLink AV200 series have the following features;

    • Crystal clear digital audio quality at 44.1kHz Stereo
    • Crisp, sharp, fully saturated video quality even at 1000ft
    • Resolution up to 1600x1200@60Hz
    • Compact size
    • Compact rack-mountable chassis for large installations
    • Receiver units with fully adjustable de-skew ensuring maximum video quality
    • Cascade transmitters to support up to 64 VDUs from a single source
    • Dual video/audio output on the receiver supports back to back monitors applications

    Data Sheet Manual 



    Ref: ALAV208TAdderLink 200 Series 8 Way Transmitter Audio, Video & RS232
    AdderLink 200 Series 8 Way Transmitter Audio, Video & RS232

    Transmitter unit only - requires receiver units

    The AdderLink AV200 series have the following features;

    • Crystal clear digital audio quality at 44.1kHz Stereo
    • Crisp, sharp, fully saturated video quality even at 1000ft
    • Resolution up to 1600x1200@60Hz
    • Compact size
    • Compact rack-mountable chassis for large installations
    • Receiver units with fully adjustable de-skew ensuring maximum video quality
    • Cascade transmitters to support up to 64 VDUs from a single source
    • Dual video/audio output on the receiver supports back to back monitors applications

    Data Sheet Manual 



    Ref: VS1504TAten 4-Port Cat 5 Audio/ VGA Video Splitter (Transmitter Unit)
    Aten 4-Port Cat 5 Audio/ VGA Video Splitter (Transmitter Unit)

    The ATEN VS1504 Cat 5 Audio/Video Splitter is a cost-effective and efficient way to send high quality audio and video content to multiple displays up to 150 m (500 ft) away from a single input source. Cascadable to three levels, the VS1504 can support thousands of displays when combined in an installation with ATEN repeaters. Incorporating RS-232 connectivity so serial devices such as touchscreens can be included in the installation, the VS1504 is ideal for any installation that requires multimedia content to be delivered to multiple destinations.

    Datasheet

     




    Ref: VS1508TAten 8-Port Cat 5 Audio/ VGA Video Splitter (Transmitter Unit)
    Aten 8-Port Cat 5 Audio/ VGA Video Splitter (Transmitter Unit)

    The ATEN VS1508 Cat 5 Audio/Video Splitter is a cost-effective and efficient way to send high quality audio and video content to multiple displays up to 150 m (500 ft) away from a single input source. Cascadable to three levels, the VS1508 can support thousands of displays when combined in an installation with ATEN repeaters. Incorporating RS-232 connectivity so serial devices such as touchscreens can be included in the installation, the VS1508 is ideal for any installation that requires multimedia content to be delivered to multiple destinations.

    Datasheet

     




    Ref: VB552VGA over Cat5 Repeater with Audio
    VGA over Cat5 Repeater with Audio The VB552 VGA Over Cat 5 Repeater +Audio is an audio/video signal extension device which is compatible with ATEN Cat 5 Audio/Video splitters. The VB552 extends the audio/video transmission range an extra 150m over Cat 5e (or higher) cables. The use of an additional repeater means the audio/video signals can be transmitted over even longer distances, up to 450m. Furthermore, for longer distance installations where video signals may degrade, the VB552 has adjustable video gain and compensation controls to provide the sharpest video quality possible. An IR remote control also provides picture control at the remote site. Rack-mountable, with two RS-232 channels on the unit for selection, and support for high video resolutions, the VB552 is the perfect solution to extend the range of your A/V and serial transmissions in any installation environment requiring VESA FDMI mount standards.

    Datasheet

     




    Ref: VS0116Aten 16 Port Video Splitter with Audio
    Aten 16 Port Video Splitter with Audio

    The VS0116 16 Port Video Splitter with Audio duplicates and enhances the video and audio signals from an input source (i.e. a computer) and routes them to up to 16 output devices (monitors, projectors, etc). Furthermore, it can be cascaded to additional ATEN video splitters to support hundreds of monitors.

    • One video input 16 video outputs
    • Cascadable to 3 levels - provides up to thousands of video signals
    • Audio enabled
    • Long distance transmission - up to 65 m (210')
    • High video resolution - 1920 x 1440
    • Supports VGA, XGA, SVGA, UXGA and multisync monitors
    • DDC, DDC2, DDC2B Compatible (Port 1 only)

    VS0116 Data Sheet

     





    End Design AV > VGA Solutions > VGA Distribution

    End Design Limited Established 1985 Registered in England & Wales Company No. 1920982 Registered Office Unit 37 Bookham Industrial Park Church Road Bookham KT23 3EU.
    VAT registration No. GB 384 3922 29 Telephone 01372 458080 Fax 01372 450592